HYDRODYNAMIC FLOW CHARACTERISTICS IN AN INTERNALLY CIRCULATING FLUIDIZED BED GASIFIER

Simanjuntak, Janter P. and Al-attab, K. A. and Zainal, Z. A. (2019) HYDRODYNAMIC FLOW CHARACTERISTICS IN AN INTERNALLY CIRCULATING FLUIDIZED BED GASIFIER. Journal of Energy Resources Technology, 141. 032001-1.

[thumbnail of Hydrodynamic Flow characteristics.pdf]
Preview
Text
Hydrodynamic Flow characteristics.pdf - Published Version

Download (3MB) | Preview
[thumbnail of Correspondence.pdf]
Preview
Text
Correspondence.pdf - Published Version

Download (1MB) | Preview

Abstract

In this paper, the hydrodynamic flow inside an internally circulating fluidized bed (ICFBG) was characterized using experimental and three-dimensional computational fluid dynamics (CFD) models. Eulerian-Eulerian model (EEM) incorporating the kinetic theory of granular flow was implemented in order to simulate the gas–solid flow. A fullscale plexiglass cold flow experimental model was built to verify simulation results prior to the fabrication of the gasifier. Six parameters were manipulated to achieve the optimum design geometry: fluidization flow rate of the draft tube (Qdt), aeration flow rate of the annulus (Qan), initial bed static height (Hbs), draft tube height (Hdt), draft tube diameter (Ddt), and orifice diameter (Dor). The investigated parameters showed strong effect on the particle flow characteristics in terms of the pressure difference (DP) and solid circulation rate (Gs). The predicted results by simulation for the optimum case were in close agreement with experimental measurements with about 5% deviation. The results show that the ICFBG operated stably with the maximum Gs value of 86.6 kg/h at Qdt of 350 LPM, Qan of 150 LPM, Hbs of 280 mm, Hdt of 320 mm, Ddt of 100 mm, and Dor of 20 mm. [DOI:10.1115/1.4041092]

Item Type: Article
Keywords: internally circulating fluidized bed, solid circulation rate, Eulerian-Eulerian model, kinetic theory of granular flow
Subjects: T Technology > TA Engineering (General). Civil engineering (General) > TA349 Mechanics of engineering. Applied mechanics
Divisions: Fakultas Teknik
Depositing User: Cut Lidya Mutia
Date Deposited: 19 Jun 2019 03:52
Last Modified: 24 May 2023 08:53
URI: https://digilib.unimed.ac.id/id/eprint/35447

Actions (login required)

View Item
View Item